AV01 CR2032
Features
Section titled “Features”A CR2032 coin cell battery holder is mounted on this leaf, and the voltage of the 3V battery is converted to 3.3V by a step-up power supply circuit, and 3.3V is supplied to each leaf. A switch for turning on/off the 3.3V is mounted on this leaf. The AD converter for monitoring the battery voltage is mounted in this IC.
Specification
Section titled “Specification”Dimension
Section titled “Dimension”| Item | Description |
|---|---|
| Dimension | W24×D20.5×H8.7mm |
Power Supply
Section titled “Power Supply”| Item | Description |
|---|---|
| Part number | TPS61099YFFR |
| Battery voltage | 0.7～3.8V |
| Output voltage | 3.3V±2% |
| Controlling method | PWM/PFM Automatic switching control |
| Maximum output current | 300mA @3.3V to 5V |
| Protection circuit | Over current protection / Thermal shutdown |
AD Converter
Section titled “AD Converter”| Item | Description |
|---|---|
| Part number | ADC081C027CIMK |
| Resolution | 8bit |
| Reference voltage | Vdd(3.3V) |
| Sample rate | 188.9kSPS(max) |
| Interfaces | I2C (Address: 0x50) |
Block diagram
Section titled “Block diagram”
Pinassign
Section titled “Pinassign”
About the switch
Section titled “About the switch”
| Item | Description |
|---|---|
| Switch | Switch for turning on and off the 3.3v power |
Sample App
Section titled “Sample App”Document
Section titled “Document”Revision history
Section titled “Revision history”- Rev A1.0: First edition, August 2019