Pin Assignment Editor

Use this page with AI

Explore with your favorite AI

Gemini & other AI

Copy this page’s context into your AI to explore how it works and what you can build.

Open Gemini

Copy the prompt, then paste it into Gemini’s message box.

View prompt

Create a pin assignment diagram for one leaf or a table comparing pin usage across multiple leaves. Edit the port names and signals, then download your diagram as a PNG or SVG image.

How to use

  1. Select a leaf or add one from a template. You can compare up to eight leaves and remove a leaf with its "×" button. For a custom leaf, start with a blank template.
  2. Edit the leaf name and each pin's port name, signal name, and category. Switch between "Single leaf" and "Leaf comparison" to check the result.
  3. Save the image as PNG or SVG. To continue editing later, save your editing data as JSON.

On your first visit, the editor starts with AP03B, AI05, AC09, AV06, and AZ01C. Your edits are saved automatically in your current browser, and your saved configuration opens on your next visit. To continue on another device, load the JSON file you saved.

For templates marked "Pins not entered," check the technical documentation before entering pin assignments. AC05 uses dedicated contacts that differ from the standard 29-pin interface and is outside the scope of this tool.

This tool draws the pin information you enter. It does not automatically determine whether leaves can be connected together. When designing a circuit, check pin voltages and connection requirements in the technical documentation for each leaf.

Leaf photo
Search documentation, sample apps, and Q&A