Environment Setting

Set up with your favorite AI

Gemini & other AI

Copy the setup prompt into your AI. Work through each step together, from checking your kit to getting it running.

Copy the prompt, then paste it into Gemini’s message box.

View prompt

Guide Leafony setup in English, one step at a time. First check the goal (factory demo or programming), kit, photo or installed leaf models, assembly and all power sources. Then ask only for needed reprogramming history, OS and tools. Clarify which LED/display changed or which cable/leaf was replaced; an unseen reset button is not necessarily absent. Give one action with its expected result and wait. Basic Kit 2 ships with AVR: use the Basic Kit guide for its unchanged demo. Before flashing, explain overwriting and confirm intent. Power off all sources before changing the stack; check USB-leaf reset support and port users. Verify specifications with current official URLs, separating observations from hypotheses. Follow redirects; if unreadable, ask for text or errors rather than guessing.

Page: Environment Setting

URL: https://docs.leafony.com/en/environment/

Getting started: https://docs.leafony.com/en/getting-started/

Basic Kit demo: https://docs.leafony.com/en/getting-started/basic/

Environment setup: https://docs.leafony.com/en/environment/

Description / headings (excerpt): Find the development environment setup guide for your Leafony STM32, AVR, or ESP32 processor leaf.

Choose a development tool

If an example specifies a tool or project, start with that tool. Otherwise, choose the workflow that fits your goal.

Arduino IDE — Start with an Arduino sketch and try the sensor and communication examples.
PlatformIO — Work in VS Code and manage board settings and libraries for each project.
STM32CubeIDE — Configure STM32 peripherals and develop with ST's tools. Follow the CubeIDE examples and debugger requirements.

Libraries and board definitions →

Choose your CPU to get started

Select your processor leaf, then follow the setup guide for your development tool.

AP03 STM32L452RE

STM32 MCU

The STM32 processor leaf included in Basic Kit 2. Debugger connection instructions are also available.

Development tools

How to connect the debugger

AP01 ATmega328P

AVR MCU

The AVR processor leaf included in Basic Kit and Basic Kit 2. Choose Arduino IDE or PlatformIO to set up your PC.

Development tools

AP02 ESP32-WROOM-32

ESP32 MCU

The processor leaf with Wi-Fi and BLE included in ESP32 Wi-Fi Kit. Choose Arduino IDE or PlatformIO to get started.

Development tools

Using AP03B or AP05?

The setup guides above target AP01, AP02 and AP03. Check the documentation for your exact model before choosing its board definition or upload connection.

AP03B STM32 MCU — Check the pin assignments, power and programming connections. AP03 software settings are not automatically interchangeable.
AP05 STM32N6 — Start with the published design resources and development requirements for this model.