Can AC09 send measurements to Google Sheets over cellular communication?

Use this page with AI

Explore with your favorite AI

Gemini & other AI

Copy this page’s context into your AI to explore how it works and what you can build.

Copy the prompt, then paste it into Gemini’s message box.

View prompt

Read this official Leafony page and explain its key points in English. For hardware help, first ask for a photo or the installed leaf models, assembly and power sources, then the goal and tools. Clarify which LED or display changed and whether a cable or leaf was replaced. Do not equate an unseen reset button with an absent one, or I2C acknowledgement with a working display. Verify specifications against sources; distinguish observations from hypotheses. Follow a redirect to its destination; if unreadable, ask for the relevant text instead of guessing.

Page: Can AC09 send measurements to Google Sheets over cellular communication?

URL: https://docs.leafony.com/en/questions/ac09-google-sheets/

Description / headings (excerpt): A reference sample targets AP03 + AI01 + AC09. Check differences from the AP03B + AI05 kit and the areas requiring hardware validation.

A reference sample for sending data to Google Sheets is available. The AC09 temperature and humidity sample describes sending AI01 readings through AC09 over HTTPS to Google Apps Script, which appends them to a sheet.

AC09 sends the measurements using cellular communication (Cat-M1), an IoT technology that runs on mobile operators’ LTE networks.

It targets AP03 + AI01 + AC09. Prepare the required hardware, including a SIM, power source, and USB interface, plus a Google account, receiver-side Apps Script, destination URL, and token settings.

The Docs guide changes SEND_INTERVAL_MS to 600000UL (10 minutes) between starting new readings and transmissions. The GitHub development template uses 30000UL (30 seconds). Actual arrival intervals depend on communication conditions. Automatic time acquisition at startup with AC09 and the chosen SIM has not yet been tested on hardware, and power-saving and battery-runtime evaluations are also pending. Begin by validating your configuration.

The program cannot be uploaded unchanged to the Cat-M1 Kit’s AP03B + AI05 configuration. AI05 has different sensors, and AP03B board settings and pin connections also need checking. Kit development preparation explains the differences and the instructions still in preparation.