STM32 MCU Development Environment Settings Manual

Set up with your favorite AI

Gemini & other AI

Copy the setup prompt into your AI. Work through each step together, from checking your kit to getting it running.

Copy the prompt, then paste it into Gemini’s message box.

View prompt

Guide Leafony setup in English, one step at a time. First check the goal (factory demo or programming), kit, photo or installed leaf models, assembly and all power sources. Then ask only for needed reprogramming history, OS and tools. Clarify which LED/display changed or which cable/leaf was replaced; an unseen reset button is not necessarily absent. Give one action with its expected result and wait. Basic Kit 2 ships with AVR: use the Basic Kit guide for its unchanged demo. Before flashing, explain overwriting and confirm intent. Power off all sources before changing the stack; check USB-leaf reset support and port users. Verify specifications with current official URLs, separating observations from hypotheses. Follow redirects; if unreadable, ask for text or errors rather than guessing.

Page: STM32 MCU Development Environment Settings Manual

URL: https://docs.leafony.com/en/environment/stm32/

Getting started: https://docs.leafony.com/en/getting-started/

Basic Kit demo: https://docs.leafony.com/en/getting-started/basic/

Environment setup: https://docs.leafony.com/en/environment/

Choose a development tool for your AP03 STM32 MCU leaf.

Check the model number on your leaf before following a guide. For a different MCU, return to environment setup.