Cellular LPWA Cat-M1 Kit

Use this page with AI

Explore with your favorite AI

Gemini & other AI

Copy this page’s context into your AI to explore how it works and what you can build.

Open Gemini

Copy the prompt, then paste it into Gemini’s message box.

View prompt

Assembled Cat-M1 Kit leaves, AX02B, a 1NCE SIM, and an empty battery holder

Overview

This development kit combines temperature, humidity, pressure and 3-axis acceleration measurements with Cat-M1 cellular communication over mobile operators' LTE networks. It uses the AI05 environmental sensor leaf, the AP03B STM32 microcontroller leaf to run programs, and the AC09 communication leaf with a Taiyo Yuden module.

Cellular LPWA uses cellular networks for low-power IoT devices. This kit uses AC09 with Cat-M1 support and includes a nanoSIM-compatible 1NCE SIM. Before communicating, check the included SIM's service status, expiration date, remaining data allowance and APN, and prepare programs to control each leaf. See the AC09 reference for SIM configuration examples and service requirements to check.

AV06 supplies power and accepts the included PH-connector battery holder for two AA cells.

Start with the Cat-M1 Kit Start Guide and video to check additional items, assembly order and sample settings. The Google Sheets temperature and humidity sample targets this kit's AP03B + AI05 + AC09 configuration.

Watch the assembly video

Play video (24s)

Contents

See the kit assembly instructions.

Leaves

Leaf Role
AC09 Cat-M1 TY Cellular LPWA Cat-M1 communication over a cellular network.
AX04 Spacer Adds space between stacked leaves.
AI05 Env Sensors Measures temperature, humidity, pressure and 3-axis acceleration. The standard configuration uses BME280 and LIS2DW12.
AP03B STM32 MCU Runs programs to read sensors and control communication leaves. A redesigned version of AP03.
AZ01C USB-C Connects to a computer over USB Type-C for serial communication and 3.3V power. Check the connections and settings specified by the matching firmware before uploading to AP03B.
AV06 1.8V~5.5V Supplies 3.3V to the leaves from batteries. The battery holder connects through a PH connector.
AX02B 29-pin Routes all 29 Leafony Bus pins to 2.54mm-pitch through-hole pads for prototyping external circuits and checking signals.

You can replace AI05 Env Sensors with the included AX02B to prototype connections to external sensors and other circuits.

See the AP03B STM32 MCU reference for specifications, pin connections and design documents.

Accessories

Accessory Purpose
AZ63 Nut Plate Secures leaves with screws.
1NCE SIM (nanoSIM-compatible) Used for AC09 cellular communication. Check the SIM's service status and communication settings before use.
M2×18 mm screws Secure the stacked leaves.
PH-connector holder for two AA cells Connects to AV06 for battery power.

Development resources

  • AI05 software: AP03 examples for periodic sensor readings, motion detection interrupts, and capture and waveform display of 100 acceleration samples after a shock.
  • Save temperature and humidity to Google Sheets with AC09: Uses AP03B to read temperature and humidity from AI05's BME280 and sends them through AC09. Select the PlatformIO environment leafony_ap03b.
Leaf photo
Search documentation, sample apps, and Q&A