AP04 STM32 MCU 2Bus
A 32-bit MCU leaf with an ARM Cortex-M4 32-bit RISC core with STMicroelectronics FPU and two Leafony buses; connect a USB leaf for USB connection or a Shield leaf for SWD use Connect a USB leaf for USB connection or a Shield leaf for SWD use.
|Arduino IDE Board Settings
|Board Part number: “NUCLEO L452RE”
|Upload method: ”STM32CubeProgrammer(Serial)
About LEDs and switches
|Lights up when in write mode.
|Resets the STM32 and other devices.
|Switch to change to Program mode.
How to use it with Arduino
In order to use this leaf with Arduino, you need to configure the board on Arduino IDE.
Please refer to Environment for setting instructions.
- Rev A: First edition, December 2020