AP01 AVR MCU
Features
Leaf using the ATmega328P, with 14 digital input and output pins (six of which can be used as PWM outputs), six analog input pins, an 8 MHz oscillator, and a reset button. Connect USB if you are using USB or Shield if you are using ICSP. When using the Arduino IDE, select the Arduino Pro or Pro Mini board and the ATmega328P (3.3V, 8MHz) processor.
Specification
| Item | Description |
|---|---|
| Part number | ATmega328P |
| Operating voltage | 3.3V |
| Input voltage | 1.5-5V |
| Digital I/O | 14 |
| Analog input | 6 |
| Flash memory | 32 KB |
| SRAM | 2KB |
| EEPROM | 1KB |
| Clock speed | 8MHz |
| Dimension | W23×D20.5×H4.7mm |
Block diagram
Pinassign
Tips
About LEDs and switches
| Item | Description |
|---|---|
| Reset switch | Reset microcontroller or other devices |
| LED | Control LED by using pin 13 (Same as Arduino UNO) |
Sample App
How to use it with Arduino
In order to use this leaf with Arduino, the board must be configured on the Arduino IDE.
Please refer to Environment for instructions.
Documents
Revision history
- Rev A1.0: First edition, August 2019
Last modified 01.01.0001