Leafony block assembly

This is a summary of what to expect when assembling a Leafony block.

How to tighten the screw

To avoid poor continuity, tighten the screws alternately and properly.

Installing and removing connectors

Attach or remove the connector to the leaf board as shown below.

– Installing

leafony_connector_assemble

– Removing

leafony_connector_teardown

When the connectors are dirty

Dirt on the contacts of the connectors and the board may result in a poor connection. In this case, wipe them lightly with a paper rag moistened with anhydrous ethanol. If the problem persists, replace the connector.


Last modified 23.10.2020