When using SWD during development

Install STM32 Cores in Arduino IDE

Use of SWD

By connecting the AX01 Shield, you can use SWD.



 SWD Connector Specifications
Model number of the connector FTSH-105-01-L-D
Number of pins 10
Pin pitch 1.27mm

Pin assignment


STLINK-V3SET comes with a cable that connects to the SWD connector of AX01 Shield, allowing you to connect it as it is.


If you have the ST-LINK-V2, you can connect it with the conversion adapter. It is also possible to use a conversion adapter to connect to the Nucleo’s SWD using a jumper cable or other means.


If you want to connect to Nucleo’s SWD, you can also build your own.

Last modified 01.01.0001